PDA

צפייה בגרסה מלאה : שלט רכב ואימבולייזר לא עובדים



disckobi
26-08-11, 12:45
מפתח דיסקברי 2

החלפתי סוללה, ניקיתי + ספריי מגעים, אך השלט לא עובד.
אין לי מושג עם עבד לפני.
קניתי את הרכב עם שתי מפתחות, אחד היה פעיל השני במגירה, היום שהחלטתי לבדוק, לא עבד, החלפתי סוללה, ניקיתי וגם לא עובד, לא פתיחה/סגירת דלתות וגם לא האמבולייזר, האם יש איזה "איפוס"?

ממליצים על מנעולן מקצועי?

momi-r
26-08-11, 12:57
דבר עם החברה, הם אמורים לעזור במקרים כאלה ואף להפנות למנעולןאם צריך. מה שכן אל תתפתה לשלם אם הם דורשים מחיר גבוה ומופרז תדבר עם המנעולן יעלה לך פחות - אבל תדבר קודם עם החברהיש מצב שיעזרו גם בחינם במקרה שהמפתח מקורי .

Gershon
26-08-11, 13:05
you have Access code?

מויש
26-08-11, 13:13
"פאר מנעולים" שנקר 2 פ"ת , ממליץ בחום, מקצוען אמיתי הגון וזול

disckobi
26-08-11, 13:43
you have Access code?

אתה מתכוון לסיבובי מפתח בדלת (ימינה ושמאלה X פעמים)?

אם כן אז יש לי.

Gershon
26-08-11, 13:54
זה עובד?

I.T
26-08-11, 14:07
במפתח האורגינלי של הרכב יש כפתור קטן לנעילה של הדלתות,רק לצערי הוא נקרה נהרס הכפתור נכנס פנימה מישהו יודע איכן מחליפים את כל המכסה העליון?

ניב151
26-08-11, 18:23
נסה בדיל אקסטרים:

http://www.dealextreme.com/p/replacement-2-button-transponder-smart-key-casing-for-land-rover-81538

disckobi
26-08-11, 20:44
גרשון,
כדי שאני אבין:
האם אני צריך עם המפתח לעשות את התהליך של סיבוב המנעול ימינה ושמאלה כדי לאפס?
האם לא יפגע במפתח העובד?

Gershon
26-08-11, 23:56
for KOBI



13
ENGINE IMMOBILISATION OVERRIDE
(Entering the emergency key access code)
If the handset is lost or fails to operate, the
engine can be re- mobilised by using the key to
enter a unique four digit emergency key
access code. The code is recorded on the
Security Information card and is entered as
follows:
1. Using the key, turn the
driver’s door lock to the LOCK
position and hold in this
position for at least 5
seconds. Then return the key
to the centre position (as shown). It is now
possible to use the key to enter the separate
numerical values of the four digits that make
up the emergency key access code.
IMPORTANT INFORMATION
When entering a code:
• ENSURE each key movement is
carried out with care and precision
and turned through the full extent of
its travel.
• After turning the key to either the
lock or unlock positions, make sure
it is FULLY returned to the centre
(vertical) position.
• If a digit is entered incorrectly, the
WHOLE code can be cancelled by
returning to operation ’1’ and
starting again.
2. Enter the FIRST digit of
the code. If the first digit is 4,
turn the key to the UNLOCK
position 4 times. Ensure the
key is FULLY returned to the
centre position after each turn of the key.
3. Enter the SECOND digit of
the code. If the second digit is
3, turn the key to the LOCK
position 3 times. Remember;
the key must be FULLY
returned to the centre position after each turn
of the key.
4. Enter the THIRD digit of
the code. If the third digit is
2, turn the key to the UNLOCK
position twice, ensuring that
the key is FULLY returned to
the centre position after each turn of the key.
5. Enter the FOURTH digit of
the code. If the fourth digit is
1, turn the key to the LOCK
position once. Ensure the key
is FULLY returned to the
centre position after the key has been turned.
6. FINALLY, turn the key to
the UNLOCK position once
more to disarm the alarm and
re- mobilise the engine. If the
code has been entered
successfully, the anti- theft alarm indicator
light on the instrument panel will extinguish
and the engine can be started.

-->