Close
1 5 1234 ...
1 10 48
  1. #1
    asafk's Avatar
    Dec 2002
    26,431

     / 24 12

    24 , 12 .
    ? ' ? ?

    .
    "scars are tattoos with better stories"
    . . .
    - VW TYPE 2 1978 | - 2008

  2. #2
    ..'s Avatar
    Oct 2018
    305

     : / 24 12

    dc2dc


    Sent from my SM-N950F using Tapatalk

  3. #3
        's Avatar
    Mar 2003
    18,877

     : / 24 12

    asafk
    24 , 12 .
    ? ' ? ?
    .
    .
    .
    ..

    "The view of the Hilux from the back, often seen by others on the trail, rarely seen by anyone on the freeway."
    Hary Wagner

  4. #4

    Dec 2002
    12,731

     : / 24 12

    IndelB 26?

    BD35/50/80F/250GH/100CN: 12V DC systems: 10.4V cut-out (or 9.6V with optional setting) - 17V max. ;
    24V DC systems: 22.8V cut-out (or 21.3V with optional setting) - 31.5V max.
    The low voltage limits can be established if a connection is made between the terminals C and P, please
    see also the passage Optional battery protection settings page 9.
    The electronic unit will calibrate to the applied voltage. This means that if the battery voltage is less than
    17V, the electronic unit assumes that it is working in a 12V system. If the voltage is higher than 17V, the
    electronic unit assumes that it is working in a 24V system. Consequently, the compressor does not run
    at power supply voltages between about 17V and the desired battery protection cut-out voltage for
    24V systems. A continuous voltage range from 9.6V to 31.5V can be established if a 220kΩ resistor (wir-
    ing diagram item 9) is connected between the terminals C and P. This wide voltage range makes the BD
    compressors very suitable for photovoltaic powering.

    , . , . indelB .

  5. #5

    Dec 2002
    12,731

     : / 24 12


  6. #6

    Jun 2008
    4,583

     : / 24 12

    -'
    IndelB 26?

    BD35/50/80F/250GH/100CN: 12V DC systems: 10.4V cut-out (or 9.6V with optional setting) - 17V max. ;
    24V DC systems: 22.8V cut-out (or 21.3V with optional setting) - 31.5V max.
    The low voltage limits can be established if a connection is made between the terminals C and P, please
    see also the passage Optional battery protection settings page 9.
    The electronic unit will calibrate to the applied voltage. This means that if the battery voltage is less than
    17V, the electronic unit assumes that it is working in a 12V system. If the voltage is higher than 17V, the
    electronic unit assumes that it is working in a 24V system. Consequently, the compressor does not run
    at power supply voltages between about 17V and the desired battery protection cut-out voltage for
    24V systems. A continuous voltage range from 9.6V to 31.5V can be established if a 220kΩ resistor (wir-
    ing diagram item 9) is connected between the terminals C and P. This wide voltage range makes the BD
    compressors very suitable for photovoltaic powering.

    , . , . indelB .
    .
    , , 24 .
    , ( , )

  7. #7
    asafk's Avatar
    Dec 2002
    26,431

     : / 24 12

    . 12/24

    .
    "scars are tattoos with better stories"
    . . .
    - VW TYPE 2 1978 | - 2008

  8. #8

    Jun 2008
    4,583

     : / 24 12

    asafk
    . 12/24

    .
    ....
    .
    (101N0xxx) 12 24V.
    , :-)

  9. #9
    asafk's Avatar
    Dec 2002
    26,431

     : / 24 12

    , 12/24


    .
    "scars are tattoos with better stories"
    . . .
    - VW TYPE 2 1978 | - 2008

  10. #10

    Jun 2008
    4,583

     : / 24 12

    , .

  1. 12
    ronko
    : 0
    : 23-07-11, 11:29
  2. 12
    UNIX -
    : 29
    : 11-07-08, 13:41
  3. 24 12
    UNIX ' CJ
    : 6
    : 27-01-07, 22:37
  4. 12
    nir4wd -
    : 5
    : 21-02-05, 00:24
  5. 24 12
    UNIX -
    : 14
    : 01-08-04, 16:07

  •