úçìéó ìWD äëðä áéúéú

[opl]

ìôðé ìà îòè æîï îéùäå ôéøñí ôä àéæä îàîø îçåì ùäùååä áéï ùìì äçåîøéí ä÷ééîéí áùå÷ ãåâîú wd40 åàçøéí åîöà ùãåå÷à æåâ çåîøéí ùòåøááå ááéú äùéâå àú äúåöàåú äèåáåú áéåúø. îéùäå îëéø? æåëø áàéæä çåîøéí îãåáø?

àçøé ôéøå÷ áåìîéí ùìà ðôúçå áîùê 13 ùðä ëåìì äùôøöú wd ìéìä ìôðé äééúé øåöä ìðñåú àú äùéìåá... ÷øòúé ùí àú äúçú òì îùéîä ùàîåøä ì÷çú ùòä åéù ìé òåã ëîä áøâéí ò÷ùðééí ùàðé öøéê ìôúåç á÷øåá

[eysham]

ìà øàéúé àú äôøñåí äîãåáø, àáì çéôåù ÷öøöø ì- HOME MADE WD40 äòìä àú æä:

https://www.engineeringforchange.org...ating_oil.html

90% ùîï áéùåì òí 10% àöèåï

àéì

[opl]

úåãä. àðé ìà îçôù ìäåæéì àú äòñ÷. äîàîø ääåà äùååä îñôøéú àú äîåîðè ùäåôòì òì äáåøâ òã ìôúéçúå áéï îñôø îåöøé îãó ìàåúå çåîø áäëðä áéúéú åäúåöàåú äéå îôúéòåú îàåã. ëøâò... àðé îåëï ìðñåú...

ãåå÷à ìà æëåø ìé ùùîï áéùåì äéä àçã îäí. àöéèåï àåìé ëï

[BackDoorMan]

àéæä ùîï áéùåì ? éù ìé ø÷ ùîï æéú áëáéùä ÷øä.

[liontamer84]

îä òí ðåæì áìí? àå àéæä 6040 ä?

[opl]

ðåæì áìí ìà úå÷ó âåîéåú?

[tomer s]

ùîï âéø àåèåîè åàöéèåï

[tomer s]

http://www.jeepolog.com/forums/showthread.php?t=62842

áá÷ùä..

[Pilon]

http://www.jeepolog.com/forums/showthread.php?t=62842

[opl]

àçìä. ùðé çåîøéí ùéù ìé ááéú... ððñä åðøàä

[BackDoorMan]

úâåáåú öåððåú îîé ùëáø ðéñä :

äáòéä ùàöèåï å ATF ìà îúòøááéí, ÷ùä ìéöø îäí àîåìñéä éöéáä åäàöèåï îúðãó áîäéøåú.
òåáã áúðàéí äîúéùéí àú äîùúîù.
"How stupid of you to repeat this BS. If you had tried it you would know that acetone and ATF do not mix anymore than oil and water. You should put some of each in a container and hope you live until they mix."

-2011, 09:30 AM

alanganes Senior Member Join Date: Jul 2006 Location: Dracut, Massachusetts Posts: 556

Yep, they don't mix, you have to shake it up really well first. I think that was stated in the article, or in a followup to it. It mixes sort of like the salad dressing. I've used this. It worked for me using ATF, easily at least as well as kroil, PB, or liquid wrench, subjectively better in my estimation. The guy who wrote the original article, did some actual tests by making several steel test samples with a tight fitting pin in a hole. He rusted them with (I think) a salt spray, then applied the various mixtures to them and allowed them to sit. He then pressed the pins out with a press that could measure the force applied. Not 100% rigorously scientific really, but way better than anything else I've read on the topic. It is in the April-May 2007 Machinist Workshop. Last edited by alanganes : 03-27-2011 at 09:44 AM.

#15 03-27-2011, 10:40 AM

bruto Senior Member Join Date: Mar 2008 Location: Vermont Posts: 512

I tried this, and it seemed to work pretty well, though I didn't approach it scientifically. It does require shaking. My problem was that the acetone evaporated so fast that it wasn't worth mixing much at a time. If you do make up some, you'll need to keep it in a bottle and decant it into the oil can when you need it. I find that most of the time it's not worth the bother, and get the job done with something less volatile.

[opl]

ëï, øàéúé àåúí... àáì ùðé äîåöøéí ááéú. ñèééáìééæø ìéð÷ ùîñøá ìäéôøã îäîåè âí ìàçø øéñåñ ùì WD, îä éù ìé ìäôñéã?

ùçëúé ìäåãåú ìçáøéí ùîöàå àú ä÷éùåø, úåãä!

[ñåôú äîãáø]

àí ëáø ãéáøå òì ÷åìä æä àëï òåáã
ñéôåø ÷öø
çáø ÷ðä âéîðé äéúä ìå áòéä áååà÷åí ùì äìå÷øéí àçã äöéðåøåú äáøæì äéå ñúåîéí æä öéðåø îôåúì
îä ùìà ðéñðå ìçõ àåéø.. ñôøéé WD40... çåúø... åëå'.. ëìåí ìà òæø
àçøé çöé ùòä áòøê ùì ðéñåééí
ì÷çðå èéôä ÷åìä áîæø÷ åäëðñðå ìúåê äöéðåø òí äìçõ ùì äîæø÷
åäåôôôô àçøé 5-10 ã÷åú äùúçøøä äñúéîä
ëîåáï ùäëì äéä ñúåí áçìåãä