Close
1 3 3

: ?

  1. #1
     .'s Avatar
    Nov 2010
    somewhere in the Mediterranean
    3,780

     : ""

    :


    http://workshop-manuals.com/landrove...meter_testing/

    - , , :

    DYNAMOMETER TESTING
    The front and rear axles cannot be driven
    independently.

    WARNING: DO NOT attempt to drive
    individual wheels with vehicle supported
    on floor jacks or stands.


    Four wheel dynamometers
    Provided that front and rear dynamometer rollers are
    rotating at identical speeds and that normal workshop
    safety standards are applied, there is no speed
    restriction during testing except any that may apply to
    the tyres.


    Two wheel dynamometers
    IMPORTANT: Use a four wheel dynamometer for
    brake testing if possible.

    If brake testing on a single axle rig is necessary it
    must be carried out with propeller shaft to rear axle
    removed
    , AND neutral selected in BOTH main
    gearbox and transfer gearbox. When checking brakes,
    run engine at idle speed to maintain servo vacuum.
    If checking engine performance, the transfer box must
    be in high range and propeller shaft to stationary axle
    must be remove
    d.
    110 - 2009...

  2. #2

    Oct 2013
    406

     : ""



    asafk
    .

    .

    Sent from my GT-I9300 using Tapatalk

  3. #3

     : ?

    5/99

    Click image for larger version. 

Name:	4X4.jpg 
Views:	509 
Size:	277.3  
ID:	115330

  1. + ?
    4X4
    : 4
    : 19-02-11, 19:49
  2. nazircrm 4X4
    : 5
    : 20-12-09, 15:58
  3. exodia1 ' +
    : 2
    : 22-07-08, 21:17
  4. ItayWitzer + '
    : 14
    : 30-04-08, 01:21
  5. landY Land Rover
    : 7
    : 12-09-07, 18:39

  •