"Neila" for Year 2000 Sufa Jeep "

I am have a Year 2000 Sufa. I am going to United States on Friday and would like to bring back a "Neila" for my Jeep to have installed here.

I am not very technical, and would like to ask if anybody knows what information I need to get on my Sufa, and what I should purchase in US.

Toda

the first thing you need to chek out is what kind of axle you have: a DANA44 or a DANA60.
then you can go and chek this:
http://www.jeepolog.com/jp_forum/vie...F0%F2%E9%EC%E4

OK. I have a Dana44. I guess the next questions would be:

1. Lock Right vs. No Slip;
2. Number of Shinim ("teeth"). I saw that a Dana 60 requires 35 but what about a DANA44?

Note - Hebrew ia bit difficult for me to read, so sorry if this was answered already?

thanks again!

what you need to ask for is
rear axle:dana 44, splin 30, open carrier No ABS, No C-clip

ציטוט:

---

. Lock Right vs. No Slip;

---

i would go for the no-slip, that's what i did in my storm
30 splin means 30 teeth.
good luck
barak.

Thanks!!!!!

try to find some information about the aussie locker

Feel free to call me when you get to the US
I'll hook you up
Joe...........940 206 9747
Let me know if you need it for the front or the rear, if you have locking hubs and what kind of froading you do.

tzagi, a standard, storm (m-240) has no locking hubs

Barak,So it has a vaccum disco Ala YJ then? or nothing at all?

אין נועלי טבורים בסופה. מחובר קבוע, עם מיסבי גלגל שלא ניתנים להחלפה ללא החלפת הטבור, כמו בYJ וה TJ . בניגוד להם אין מנגנון על הציריה הימנית לניתוק שלה. הכול מסתובב כל הזמן.
רינג-פיניון חתוכים הפוך- רוורס קאט, כמו בYJ .
דיפרנציאל בצד נהג.
יחס העברה 1:3.54
עד שנת 97 צלבים בציריות בקוטר של 26 מ"מ , משנת 97 צלבים בקוטר של 30 מ"מ 5-297

It appears that I will purchase the Lock Right for the Dana 44. Can someone let me know if the number of teeth on the ring and pinion are important. ?

לא. מה שחשוב זה מספר השיניים בסטליטים. בדנה 44 של הסיקס יש 30 שיניים. אני חושב שאצלך זה אותו דבר.

Sahaf
No lock right for you
Sounds like its similar or the same axle as in the new rubicons
you are going to get a selectable....ARB, OX,electric ect
or even the new factory air locker

the storm rear axle is a plain vanilla open diff 30 spline dana44, or 35 spline dana 60.

the front is plain open diff 27 spline dana30.

thats all the info you need to get a cheap lockright/EZ/Ausie locker, any one of them is good for 31-33 inch tires.

Sorry guys....
I thught we were talking about the front....
If its for the rear forget what I said
the locking hub part confused me.