Yontand
28-08-14, 23:42
זו רשימה של התקלות שמופיעות אצלי כולל תרגום שמצאתי ברשת ...אני לא ממש בטוח שאני מבין בדיוק איך לפתור אותן ולאן הם קשורות<center>
<tbody>
P0320
No Crank Reference Signal at PCM
No reference signal (crankshaft position sensor) detected during engine cranking.
</tbody>
</center>
<tbody>
P0132 (M)
O2 Sensor Circuit High Voltage (Bank 1 Sensor 1)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<tbody>
P0138 (M)
O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<tbody>
P0158 (M)
O2 Sensor Circuit High Voltage (Bank 2 Sensor 2)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<center>
<tbody>
P1686
No SKIM BUS Messages Received
No CCD/J1850 messages received from the Smart Key Immobilizer Module (SKIM).
</tbody>
-האם התקלה הראשנה(0320) קשורה לחיישן שנמצא על הגיר שמזייף בגלל המגע
-0132, 0138,0158 אני מבין שהם מצביעים על אותה תקלה ...האם צריך להחליף את החיישן חמצן?(ברכב יש אגזוז זרימה חופשית )
-1686 אני מבין שמצביע על תקלה כלשהי במפתח עם קשר לאימבולייזר
אשמח אם מישהו יוכל לחדד לי מה מקור הבעיות ואת פיתרונם ....
תודה חברים ושהיה אחלה סופ״ש
http://www.jeepolog.com/forums/images/icons/icon6.png
</center>
יונתן
<tbody>
P0320
No Crank Reference Signal at PCM
No reference signal (crankshaft position sensor) detected during engine cranking.
</tbody>
</center>
<tbody>
P0132 (M)
O2 Sensor Circuit High Voltage (Bank 1 Sensor 1)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<tbody>
P0138 (M)
O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<tbody>
P0158 (M)
O2 Sensor Circuit High Voltage (Bank 2 Sensor 2)
Oxygen sensor input voltage maintained above normal operating range.
</tbody>
<center>
<tbody>
P1686
No SKIM BUS Messages Received
No CCD/J1850 messages received from the Smart Key Immobilizer Module (SKIM).
</tbody>
-האם התקלה הראשנה(0320) קשורה לחיישן שנמצא על הגיר שמזייף בגלל המגע
-0132, 0138,0158 אני מבין שהם מצביעים על אותה תקלה ...האם צריך להחליף את החיישן חמצן?(ברכב יש אגזוז זרימה חופשית )
-1686 אני מבין שמצביע על תקלה כלשהי במפתח עם קשר לאימבולייזר
אשמח אם מישהו יוכל לחדד לי מה מקור הבעיות ואת פיתרונם ....
תודה חברים ושהיה אחלה סופ״ש
http://www.jeepolog.com/forums/images/icons/icon6.png
</center>
יונתן