μτι δεψΰεϊ διφψο...

(βιμει πΰεϊ - ξεςϊχ ξρτψ ψλα ωμ ψπβμψ 2005)

DIFFERENTIAL COVER
REMOVAL
(1) With vehicle in neutral, position vehicle on hoist.
(2) Remove drain plug.
(3) Remove cover bolts.
(4) Remove cover and drain lubricant.
INSTALLATION
(1) Apply a 6.35mm (1/4 in.) bead of Mopar Silicone
Rubber Sealant or equivalent to the housing
cover (Fig. 39).
CAUTION: If housing cover is not installed within 3
to 5 minutes, the cover must be cleaned and new
RTV applied. Failure to heed caution may result in
damage.
(2) Install cover and identification tag. Tighten
cover bolts in a criss-cross pattern to 41 N·m (30 ft.
lbs.).
(3) Fill differential to specifications.
(4) Install fill plug and tighten to 34 N·m (25 ft.
lbs.).