אם נח היה בונה ג'יפ במקום תיבה

[עירא]

Noah, on Building a Jeep
Posted on the Jeep-L by Jeff Sahol.




Noah is a Jeep owner...
and God comes back to check on progress after one year...


"Well, it's not quite finished yet, Lord.
I decided to put some 38-inch Swampers under it for extra flotation,
then realized that I'd get some rubbing on the gunwales,
so I did some trimming on the side to fit the tires.
But while I was under there, I saw where I could move the shock
mounts up and get more travel, and figured since we don't know what
kind of terrain we'd be coming back down to,
I might want to make the modification.


Well, it went ok, except that it made the rear suspension kind of
spongy, so I decided to redo the 5-link in favor of some leaf
springs...which is a whole 'nuther story.
I had to rig up a new crossmember, and while I was at it,
I put in a 2" body lift and replaced the stock crossmember with one
that had better tuck, since I didn't know exactly how much higher
the flood would go than the mountains, and I didn't want to get
stuck on some awful mountain in Turkey or somewhere.


So I go to do the body lift and then realize that the engine will
need to be lifted, too, to resolve some drivetrain problems
and also to keep the radiator fan out of the shroud.
Then I realized, 'radiator fan? water crossing?',
and I went ahead and took out the clutch fan and put an electric in.
I also upgraded to a 3-core radiator.
Since we were going to be over water so much, I also stripped the
body down completely, in order to Rhino Line it, inside and also
underbody. That took forever because of the the tamper-proof torx
bolts, but I finally got the cage out and figured while I'm at it,
I might as well do a complete six-point cage,
but the local shop had nothing but rolled tube and I wanted DOM,
so there was a delay there.


So we get the tub put back together, the new cage in,
and I saw that the underside was really unprotected, so I decided
to add some armor. Made up some custom skid plates that attached to
the new crossmember I'd made, and also some rocker protection
that has built-in flotation devices...
you know what that means: on-board air.


Well, I scraped around in junkyards for a while till I found the
right York compressor and fabbed up a bracket for it.
Also got a K&N filter to move the stock airbox so the compressor
would fit. Now I'm looking at all that armor I'd added (1/4" steel)
and realize that the pitiful little 4 cylinder is not going to cut
it with all that weight, not to mention all the animals and food
and stuff, so I found a V8 that would fit (I figured that the DMV
of all things would not be around after the Flood anyway,
which is why I felt ok about doing a V8 instead of sticking with
a stock motor), but I needed a new bellhousing etc. and realized
that I might as well upgrade the transmission and transfer case
at the same time..."


At this point God interrupts Noah, "That's ok, Noah.
I figured this might happen, so I also enlisted your wife to help,
and she's picked out a nice used Suburban that will do just fine.
Just go on down to the dealer and pick it up and you..."


Noah breaks in, "yeah, okay ... and with some fender trimming
and a body lift, I could fit some "35s" ... yeah that'll do ...
and maybe put a winch on the front ... and"


God: "Uh, Noah?"


Yes, Lord?


Never mind!!!!




http://toplessjeepchick.homestead.com/humor.html

[barak4*4]

עירא, פשוט ענק!!!

לא נראה לי בכלל שמדובר על נח, נראה לי שמדובר על " שחר סופה" או על נקסוס :lol: .

תגיד, בגלל זה אתה שואל על פאן קלאץ'? אתה הולך לשחות עם הסיקס? לא חבל, אחרי השיפוץ היפה להטביע אותו? :wink:

ברק

[Bulldog]

אתם לא מבינים, אבל זה פשוט עובד ככה.
לדוגמא: פירקתי את הסרן הקידמי לטובת שיפוץ כללי, על הדרך היות והמכסה של הדיפרנציאל כבר אצלי לא נמגן אותו, נמגן אותו. יושב עם הבעל בית שלי מתכנן מיגון, על הדרך לא נעבור להיגוי עילי ותפוחים של GM, למה לא. השפור יוצא גבוה ב10 ס"מ מהמקורי ואפילו התפוחים זולים יותר.
וזה רק בסרן הקידמי

[עירא]

עומר, ספר לי על זה....
פגוש לא?

עירא