ωμθ ηγω μβ'ιτ
φιθεθ δδεγςδ αϊβεαδ
ζδ ιςζεψ ΰν ϊφιιο ΰιζδ β'ιτ?
αβγεμ ΰϊδ φψικ ωπι ξτϊηεϊ ςεαγιν αωαιμ μλιιμ ωμιωι, μδμο δδεψΰεϊ, δξχεψ αρεσ:
***YOU MUST HAVE 2 OTHER KEYS TO PROGRAM THE NEW THIRD KEY***
ADD Duplicate Key-MUST have two Programmed already!
1. Insert one of the two valid keys into the ignition lock and turn the ON (RUN) position.
2. After the key has been in the ON position for at least five seconds, but no more than 15 seconds turn the lock back to OFF.
3. Remove the Key and insert the second valid key and turn to the ON position within 15 seconds. (The second Key must not be the same as the first key)
4. A theft alarm light should illuminate after ten seconds and a single chime sound will indicate entry into the Customer Programming Mode.
5. Turn the key to the OFF position within 60 seconds and remove the Valid key.
6. Insert a new key and turn to the ON position.
7. After approximately ten seconds, a single chime will sound and the theft alarm will stop. Wait Five seconds and turn to the OFF position.
http://www.jeepgarage.org/f187/how-t...wks-26363.html
πλϊα αξχεψ ςμ ιγι γεγε ΰψφι
ωξψε ςμ χωψ